Read Sony FST-GTK33IP / RDH-GTK11IP / RDH-GTK33IP Service Manual online
FST-GTK11iP/GTK33iP/RDH-GTK11iP/GTK33iP
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.03
New
1.1
2012.06
Deletion of 120V AC area in E model (FST-GTK11iP)
Addition of confi rmation points of bond fi xation
Addition of CUSHION (PW) and the portion which applies bond
Change of how to stick CUSHION (E) to BACK PANEL
(SMR-12012)
1.2
2013.04
Change of Part No. for Ref. No. CN551 on the IP board
(SMR-12068)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.