Read Sony DHC-MD5 / HCD-MD5 Service Manual online
– 16 –
When the MUTLI JOG dial and VOLUME control dial are rotated,
the JOG count display will count up or down accordingly.
(E.g.)
the JOG count display will count up or down accordingly.
(E.g.)
This value will be as follows (JOG
count display).
(When the JOG dial is rotated right.)
count display).
(When the JOG dial is rotated right.)
Note: To end this mode, KEY=OK must be displayed.
4-5. TRACKING BALANCE DISPLAY MODE FOR
CD SECTION
4-5-1. Setting and Operating the Tracking Balance Indi-
cation Mode
1. Turn ON the power of the unit, and press the [FUNCTION] key
to set the CD mode.
(This mode cannot be set if the function is not CD.)
(This mode cannot be set if the function is not CD.)
2. Set this mode by pressing the
π(CD) + DISPLAY keys to-
gether.
3. When set, the following will be displayed.
4-6. CHECK MODE FOR CLOCK FUNCTION
4-6-1. Setting and Operating the Check Mode
1. Turn OFF the power of the unit.
2. Set this mode by pressing the
2. Set this mode by pressing the
π (MD) + DISPLAY keys
together.
3. When set, the clock display will be highlighted.
Note: In this mode, the clock display is highlighted only for a short
time. If necessary, press the
π (MD) + DISPLAY keys
together again.
(This mode is automatically released.)
(This mode is automatically released.)
JOG =
0 1 2 99 1
Note: In this mode, the display is lit only for a short time. If neces-
sary, press the
πCD + DISPLAY keys together again.
(This mode is automatically released.)
CD
.
TR BAL 3
. 2
VOL
Click on the first or last page to see other DHC-MD5 / HCD-MD5 service manuals if exist.