DAV-X1G, HCD-X1G - Sony Audio Service Manual (repair manual). Page 15

15

4

four screws
(BVTP3 

×

 8)

6

screw
(BV 3)

9

three screws
(BV 3)

q;

DVD mechanism deck
(CDM85-DVBU102)

7

two screws
(BVTP3 

×

 8)

7

screw
(BVTP3 

×

 8)

5

DMB10 board

8

sub chassis

2

wire (flat type) (5 core)
(CN202)

3

wire (flat type) (13 core)
(CN301)

wire (flat type) (24 core)

optical pick-up block

1

Perform work with this wire (flat type) (24 core) connected,
or make a bridge as mentioned above and then disconnect the wire (flat type) (24 core).
(optical pick-up will be destroyed without bridging.)
On the contrary at the installation, connect the wire (flat type) (24 core) first,
and then remove the bridge.
Note: For a soldering iron, use the one with a ground wire.

Note: Refer to SERVICING NOTES

“ NOTE OF REPLACING THE DMB10 BOARD”
(page 4), when replacing the DMB10 board.

Be sure to bridge here, and then disconnect the
wire (flat type) (24 core).
(optical pick-up block will be destroyed without bridging.)
On the contrary at the installation, connect the
wire (flat type) (24 core) first, and then remove the bridge.
Note: For a soldering iron, use the one with a ground wire.
(Refer to DISASSEMBLY 3-2. OPTICAL PICK-UP BLOCK (KHM-310CAA OR KHM-313CAA))