Read Sony DAV-X10 / HCD-X10 Service Manual online
7
HCD-X10
NOTE OF REPLACING THE WIRE (FLAT TYPE) (11 CORE) (CN507 ON THE MAIN BOARD – CN801 ON
THE DISPLAY BOARD)
THE DISPLAY BOARD)
Two types exist in the MAIN board mounted in this set.
The WIRE (FLAT TYPE) (11 CORE) connected between the CN507 on the MAIN board and the CN801 on the DISPLAY board is different
according to the type.
Replace it for the WIRE (FLAT TYPE) (11 CORE) that is sure to suit each type when you replace the WIRE (FLAT TYPE) (11 CORE).
The set is damaged when not replaced for correct the WIRE (FLAT TYPE) (11 CORE).
The WIRE (FLAT TYPE) (11 CORE) connected between the CN507 on the MAIN board and the CN801 on the DISPLAY board is different
according to the type.
Replace it for the WIRE (FLAT TYPE) (11 CORE) that is sure to suit each type when you replace the WIRE (FLAT TYPE) (11 CORE).
The set is damaged when not replaced for correct the WIRE (FLAT TYPE) (11 CORE).
Note:
The service parts of the MAIN board are only type-12.
When you replace the MAIN board of type-11, replace the WIRE (FLAT TYPE) (11 CORE) (CN507 on the MAIN board - CN801 on the display
board) at the same time for the one for type-12.
When you replace the MAIN board of type-11, replace the WIRE (FLAT TYPE) (11 CORE) (CN507 on the MAIN board - CN801 on the display
board) at the same time for the one for type-12.
•
Type-11/Type-12 discrimination
•
Combination
Type of MAIN board
Part No. of WIRE (FLAT TYPE) (11 CORE)
Remark
Type-11
1-833-128-11 WIRE (FLAT TYPE) (11 CORE)
It folds according to the figure below and it uses it.
Type-12
1-828-319-11 WIRE (FLAT TYPE) (11 CORE)
It uses it without folding.
Type-11
: 1-872-739-11
Type-12
: 1-872-739-12
11
CN507
1
– MAIN Board (Component Side) –
MAIN board
DISPLAY board
WIRE (FLAT TYPE)
(11 CORE)
(11 CORE)
CN507
CN801
30 mm
30 mm
82 mm
UL TYPE
8 mm
For TYPE-11
For TYPE-12
Position of WIRE (FLAT TYPE) (11 CORE)
Click on the first or last page to see other DAV-X10 / HCD-X10 service manuals if exist.