Read Sony DAV-X1 / HCD-X1 Service Manual online
9
HCD-X1
FRONT PANEL SECTION SERVICE POSITION
• In checking the front panel section, prepare extension jig (Part No. J-2501-243-A: 1.00 mm Pitch, 17 cores, Length 300 mm).
POWER-AMP BOARD SERVICE POSITION
• In checking the POWER-AMP board, prepare extension jig (Part No. J-2501-244-A: 1.00 mm Pitch, 21 cores, Length 300 mm).
MAIN board
(CN506)
(CN506)
POWER-AMP board
(CN301)
(CN301)
MAIN board
POWER-AMP board
Connect extension jig (J-2501-244-A) to the
MAIN board (CN506) and POWER-AMP board (CN301).
MAIN board (CN506) and POWER-AMP board (CN301).
Note: Remove the MAIN Board once, and then remove the POWER-AMP board.
After that, reinstall the MAIN Board and set this service position.
Reconnect the
power cord.
power cord.
MAIN board
(CN505)
(CN505)
SWITCH board
(CN801)
(CN801)
front panel section
Connect extension jig (J-2501-243-A) to the
MAIN board (CN505) and SWITCH board (CN801).
MAIN board (CN505) and SWITCH board (CN801).
Click on the first or last page to see other DAV-X1 / HCD-X1 service manuals if exist.