DAV-X1, HCD-X1 - Sony Audio Service Manual (repair manual). Page 12

12

 Follow the disassembly procedure in the numerical order given.

1

two screws
(PTP 3 

×

 8)

5

two
insulator screws

5

two insulator screws

3

two claws

4

Lift up the holder (FFC).

6

Lift up the
optical-pick-up block.

9

optical-pick-up block
(KHM-310CAA)

2

cover (CDM)

Note: The Cover (CDM) on the bottom of the set can be removed

when replacing the Optical Pick-up Block KHM-310CAA.

8

Be sure to bridge here, and then disconnect the
wire (flat type) (24 core).
(optical pick-up block will be destroyed without bridging.)
On the contrary at the installation, connect the
wire (flat type) (24 core) first, and then remove the bridge.
Note: For a soldering iron, use the one with a ground wire.

PRECAUTION WHEN REMOVING GOOD OPTICAL PICK-UP BLOCK

7

connector

• This set can be disassembled in the order shown below.

3-2. OPTICAL PICK-UP BLOCK (KHM-310CAA)

(Page 12)

3-3. SIDE PANEL (L/R)

(Page 13)

3-4. CASE (AL)

(Page 13)

3-5. FRONT PANEL SECTION

(Page 14)

3-6. MAIN BOARD

(Page 15)

3-9. CHUCK CAM, BELT

(Page 17)

3-7. D.C. FAN (M450), BACK PANEL SECTION

(Page 15)

3-8. DVD MECHANISM DECK (CDM85-DVBU102)

(Page 16)

SET