DAV-F200, DAV-F500, HCD-F200, HCD-F500 - Sony Audio Service Manual (repair manual). Page 2

NOTES  ON  CHIP  COMPONENT  REPLACEMENT
•  Never reuse a disconnected chip component.
•  Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

FLEXIBLE  CIRCUIT  BOARD  REPAIRING
•  Keep the temperature of soldering iron around 270 °C during 

repairing.

•  Do not touch the soldering iron on the same conductor of the 

circuit board (within 3 times).

•  Be careful not to apply force on the conductor when soldering 

or unsoldering.

COMPONENTS  IDENTIFIED  BY  MARK  0  OR  DOTTED  LINE  
WITH  MARK  0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 

LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  0  SUR  
LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.

Control unit (HCD-F200)
Output voltage (DIGITAL MEDIA PORT)
 DC 

5 

V

Output current (DIGITAL MEDIA PORT)
 700 

mA

Dimensions (approx.) 

434 mm × 185 mm × 78 mm 
(w/h/d)

 

434 mm × 214 mm × 124 mm 
(w/h/d) with stand

Mass (approx.) 

3.6 kg

 

3.7 kg with stand

Control unit (HCD-F500)
Output voltage (DIGITAL MEDIA PORT)
 DC 

5 

V

Output current (DIGITAL MEDIA PORT)
 700 

mA

Dimensions (approx.) 

434 mm × 185 mm × 78 mm 
(w/h/d)

 

434 mm × 214 mm × 124 mm 
(w/h/d) with stand

Mass (approx.) 

3.6 kg

 

3.7 kg with stand

Design and specifi cations are subject to change without 
notice.

CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.

When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a 
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case, 
check the following table.

When you turn on the system, the version 
number [VER.X.XX] (X is a number) may 
appear on the TV screen. Although this is not a 
malfunction and for Sony service use only, 
normal system operation will not be possible. 
Turn off the system, and then turn on the system 
again to operate.

C 13

• The disc is dirty.

Clean the disc with a soft cloth. 

• The disc is a format that the 

system cannot play.

C 31

The disc is not inserted correctly.
Restart the system, then re-insert 

the disc correctly.

E XX

(XX is a 
number)

To prevent a malfunction, the 
system has performed the self-
diagnosis function.
Contact your nearest Sony

dealer or local authorized Sony
service facility and give the 5-
character service number.

Example: E 61 10

C:13:50

VER.X.XX

This appliance is
classified as a CLASS 1
LASER product. This
marking is located on 
the bottom exterior.