Read Sony DAV-DZ285K / DAV-DZ290M / DAV-DZ585K / DAV-DZ590M / DAV-DZ685K / DAV-DZ690M / HCD-DZ285K / HCD-DZ290M / HCD-DZ585K / HCD-DZ590M / HCD-DZ685K / HCD-DZ690M Service Manual online
HCD-DZ285K/DZ290M/DZ585K/DZ590M/DZ685K/DZ690M
18
60: Focus on error
61: Seek fail error
62: Read Q data/ID error
70: Lead in data read fail
71: TOC read time out (CD)
80: Can’t buffering
81: Unknown media type
6-4-1. Clear the Laser Hour
Press [ DISPLAY] button and then press [CLEAR] button on
the remote commander. The data for both CD and DVD data are
reset.
Press [ DISPLAY] button and then press [CLEAR] button on
the remote commander. The data for both CD and DVD data are
reset.
6-4-2. Clear the Emergency History
Press [DVD TOP MENU] button and then press [CLEAR] button
on the remote commander. The error code for all emergency history
would be reset.
Press [DVD TOP MENU] button and then press [CLEAR] button
on the remote commander. The error code for all emergency history
would be reset.
6-4-3. Clear the Initialize Setup Data
Press [DVD MENU] button and then press [CLEAR] button on the
remote commander.
Press [DVD MENU] button and then press [CLEAR] button on the
remote commander.
Emg. History Check
01. 01 05 04 04
Laser Hours
CD
0h
0min
DVD
0h
0min
00 92 46 00
00 00 00 00
00 00 23 45
02. 02 02 01 01
00 A9 4B 00
00 00 00 00
00 00 23 45
[Next] Next Page [Prev] Prev Page
[O] Return to Top Menu
[O] Return to Top Menu
01. 00 00 00 00
Laser Hours
CD
999h
59min
DVD
999h
59min
00 00 00 00
00 00 00 00
00 00 00 00
02. 00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
[Next] Next Page [Prev] Prev Page
[O] Return to Top Menu
[O] Return to Top Menu
Emg. History Check
Emg. History Check
initialize setup data...
Laser Hours
CD
999h
59min
DVD
999h
59min
[Next] Next Page [Prev] Prev Page
[O] Return to Top Menu
[O] Return to Top Menu
6-4-4. Return to the Top Menu of Remocon Diagnosis
Menu
Press [0] button on the remote commander.
6-5. CHECK VERSION INFORMATION
To check the version information, please follow the following
procedure.
To check the version information, please follow the following
procedure.
(1) From the Top Menu of Remocon Diagnosis Menu, select “4.
Version Information” by pressing the [4] button on the remote
commander. The following screen appears on the on-screen
display.
commander. The following screen appears on the on-screen
display.
To return to the Top Menu of Remocon Diagnosis Menu, press
[0] button on the remote commander.
[0] button on the remote commander.
7. D.C.A.C. (AUTOMATIC ACOUSTIC FIELD CALIBRA-
TION) TEST MODE
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to set the function “ DVD”.
3. Insert Calibration mic (ECM-AC2) supplied as an accessory
3. Insert Calibration mic (ECM-AC2) supplied as an accessory
into the AUDIO IN/A.CAL MIC jack.
4. While pressing the [
x
] and [
Z
] buttons simultaneously, turn
the [VOLUME] control in the direction of (–).
5. Confi rm that the following are shown on the display panel.
1
The JACK inserted/non-inserted detection display and the
STEREO/MONO detection display.
2
Presence of DIGITAL voice input to the microcomputer.
(OK: input, NG: no input)
3
The AD value of the MIC input to the microcomputer.
(shown “255h”)
6. To exit from this mode, press the [
x
] and [
Z
] buttons simulta-
neously, turn the [VOLUME] control in the direction of (–).
Version information
[O] Return to Top Menu
Firm (Main) : Ver. xxxxx
Firm (Sub) : xxxxx
RISC : xxxxx
8032 : xxxxx
Audio DSP : xxxxx
Servo DSP : xxxxx
Firm (Sub) : xxxxx
RISC : xxxxx
8032 : xxxxx
Audio DSP : xxxxx
Servo DSP : xxxxx
Phy,Adr, : F,F,F,F,
“NON” : Not detected
“ST” :
STEREO
“MN” :
MONO
OK : input
NG : no input
0-255 (Changes in real time)
Click on the first or last page to see other DAV-DZ285K / DAV-DZ290M / DAV-DZ585K / DAV-DZ590M / DAV-DZ685K / DAV-DZ690M / HCD-DZ285K / HCD-DZ290M / HCD-DZ585K / HCD-DZ590M / HCD-DZ685K / HCD-DZ690M service manuals if exist.