Read Sony DAV-DZ170 / DAV-DZ171 / DAV-DZ175 / DAV-DZ310 / DAV-DZ510 / DAV-DZ610 / DAV-DZ810 / HBD-DZ170 / HBD-DZ171 / HBD-DZ175 / HBD-DZ310 / HBD-DZ510 / HBD-DZ610 / HBD-DZ810 Service Manual online
HBD-DZ170/DZ171/DZ175/DZ310/DZ510/DZ610/DZ810
11
2-4. FL BOARD, ENCODER BOARD, JACK BOARD, USB BOARD
Ver. 1.1
1
wire (flat type) (13 core) (CN5005)
(DZ170/DZ171/DZ175)
wire (flat type) (15 core) (CN5002)
(DZ310/DZ510/DZ610/DZ810)
wire (flat type) (15 core) (CN5002)
(DZ310/DZ510/DZ610/DZ810)
2
screw
(+BV3 (3-CR))
3
screw
(+BV3 (3-CR))
qs
screw
(+BV3 (3-CR))
9
two screws
(+BV3 (3-CR))
4
CN5006 (2P)
(US,
Canadian
model)
CN5007
(3P)
(Except US, Canadian, Russian model)
CN5003 (4P) (Russian model)
CN5003 (4P) (Russian model)
8
CN4007 (4P) (US, Canadian model)
CN4008 (5P) (Except US, Canadian, Russian model)
CN4011 (4P) (Russian model)
CN4011 (4P) (Russian model)
5
FL board
0
JACK board
qd
JACK board
MAIN board
7
ENCODER board
6
claw
qa
CN2101 (5P)
Arranging the USB wire
USB wire
USB wire
Tie up with LP501.
Thread the USB wire through
the capacitors.
the capacitors.
The USB wire should be located on the front side
from these capacitors.
from these capacitors.
Dress the USB wire in this area
properly along the board.
properly along the board.
Have the USB wire spread on the inside
of the claws of the chassis.
of the claws of the chassis.
Click on the first or last page to see other DAV-DZ170 / DAV-DZ171 / DAV-DZ175 / DAV-DZ310 / DAV-DZ510 / DAV-DZ610 / DAV-DZ810 / HBD-DZ170 / HBD-DZ171 / HBD-DZ175 / HBD-DZ310 / HBD-DZ510 / HBD-DZ610 / HBD-DZ810 service manuals if exist.