Read Sony DAV-DS1000 / SA-WS1000 Service Manual online
5
SA-WS1000
DVD player :
DVX-DS1000
DVX-DS1000
DVD player : DVX-DS1000
Sub woofer :
SA-WS1000
SA-WS1000
Sub woofer : SA-WS1000
Tuner :
ST-DS1000
ST-DS1000
Tuner : ST-DS1000
Front speaker :
SS-IF1000
SS-IF1000
Front speaker : SS-IF1000
Center speaker :
SS-CT1000
SS-CT1000
Center speaker :
SS-CT1000
SS-CT1000
Rear speaker :
SS-IR1000
SS-IR1000
Rear speaker : SS-IR1000
Remote
commander :
RM-SS1000/
commander :
RM-SS1000/
SS1000B
Remote commander :
RM-SS1000/SS1000B
RM-SS1000/SS1000B
Units required for
operation
check
Unit.
need to
checking
need to
checking
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
*
1
*
1
*
2
*
1 Only the defective unit.
*
2 Either one of them.
Units with
a
mark: The units that are required for the system operation check during repair service
However, there can be a case that some units of the system need to not be brought into repair shop depending on the unit. that became defective.
• The units that are required for the system operation check during repair service
[The check method of the output signal from ENCORDER board]
Procedure:
1.
A spectrum analyzer is connected to pin 5(L-ch) and pin 1(L-ch) of the output connector CN2004 of ENCORDER board.
digital
voltmeter
BATT +
BATT –
BATT –
MAIN board
10
Ω
(0.5%)
2.
Confirm that it is spectrum as shown in a figure with the spectrum analyzer.
It is normal if the signal of a 3MHz to 6MHz zone (a center is 4.5MHz) can be checked.
It is normal if the signal of a 3MHz to 6MHz zone (a center is 4.5MHz) can be checked.
3.
When the output signal from ENCORDER board is normal, pin 2(DATA),pin 1(LRCK),pin 3(BCK) and pin 5(FS256) of the
input signal connector CN2001 are investigated.
Moreover, each signal of the control signal connector CN2003 is checked.
input signal connector CN2001 are investigated.
Moreover, each signal of the control signal connector CN2003 is checked.
Click on the first or last page to see other DAV-DS1000 / SA-WS1000 service manuals if exist.