Read Sony DAR-X1R / DAV-X1V / SS-WSX1V / SS-X1VF Service Manual online
SERVICE MANUAL
•
SS-WSX1V is subwoofer in DAV-X1V.
•
SS-X1VF is front speaker in DAR-X1R/
DAV-X1V.
DAV-X1V.
SPEAKER SYSTEM
US Model
Canadian Model
AEP Model
UK Model
SPECIFICATIONS
SS-WSX1V/X1VF
Photo: SS-WSX1V
Ver. 1.1 2006.10
Photo: SS-X1VF
•
JIG
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
When disassembling the set, use the following jig (for
speaker removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
Front Speaker (SS-X1VF)
Speaker system
Closed type, magnetically shielded
Speaker unit
25 mm (1 inch) balance drive type
×
1,
50 mm (2 inches) cone type
×
2
Rated impedance
4 ohms
Dimensions (approx.)
183
×
75
×
123 mm
(7
1
/
4
×
3
×
4
7
/
8
inches) (w/h/d)
183
×
110
×
148 mm
(7
1
/
4
×
4
3
/
8
×
5
7
/
8
inches) with stand
(w/h/d)
Mass (approx.)
0.8 kg (1 lb 13 oz)
1.0 kg (2 lb 4 oz) with stand
1.0 kg (2 lb 4 oz) with stand
Subwoofer (SS-WSX1V)
Speaker system
Bass reflex, magnetically shielded
Speaker unit
150 mm (6 inches) cone type
×
2
Rated impedance
4 ohms
Dimensions (approx.)
205
×
440
×
400 mm
(8
1
/
8
×
17
3
/
8
×
15
3
/
4
inches) (w/h/d)
Mass (approx.)
9.3 kg (20 lb 9 oz)
Design and specifications are subject to change without notice.
9-887-305-02
2006J05-1
© 2006.10
© 2006.10
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Published by Sony Techno Create Corporation
2
SS-WSX1V/X1VF
3
Raise the front panel assy a little by little
from bottom to top of the set.
from bottom to top of the set.
4
front panel assy
1
Insert a flat-tip screwdriver into a recess
in the bottom of the set
to raise the front panel assy a little.
in the bottom of the set
to raise the front panel assy a little.
2
Insert the jig (J-2051-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
made by inserting the screwdriver,
and raise the front panel assy gradually.
2
Insert the jig (J-2501-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
made by inserting the screwdriver,
and raise the front panel assy gradually.
SECTION 1
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
1-1. FRONT PANEL ASSY (SS-WSX1V)
3
SS-WSX1V/X1VF
3 mm
3 mm
Note: The front grille assy has been stuck with the rubber.
(The sticking location is different depending on the speaker)
Raise the front grille assy gently through the following procedure.
φ
0.8 mm
clip
front grille assy
jig clip
φ
0.8 mm
clip
tape
tape
tape
clip
clip
rubber
rubber
1
Prepare two clips (thickness
φ
0.8 mm).
2
Open the clips.
3
It piles it up as shown in figure.
4
Three places are fixed with the tape.
5
Bend the leading end by about 3 mm.
6
Insert the jig clip into a hole in the front grille assy
and raise the front grille assy.
and raise the front grille assy.
1-2. HOW TO REMOVE THE FRONT GRILLE ASSY (SS-X1VF)
4
SS-WSX1V/X1VF
2
SP2
2
1
SP1
not supplied
not supplied
not supplied
5
4
2
3
4
2
3
4
2
2
3
2
4
3
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
1
A-1236-758-A PANEL ASSY, FRONT
2
4-238-407-12 SCREW (1) (4X20), +BV TAPPING
3
2-678-836-01 LEG
4
2-678-838-02 FOOT, RUBBER
2-1.
SS-WSX1V
•
Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
•
The mechanical parts with no reference
number in the exploded views are not supplied.
number in the exploded views are not supplied.
NOTE:
•
-XX and -X mean standardized parts, so they
may have some difference from the original
one.
may have some difference from the original
one.
•
Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color
Cabinet's Color
5
2-678-837-01 PROTECTOR
SP1
1-826-466-11 LOUDSPEAKER (15cm)
SP2
1-826-466-11 LOUDSPEAKER (15cm)
SECTION 2
EXPLODED VIEWS
Ver. 1.1
