CX-JV3, JAX-V3 - Sony Audio Service Manual (repair manual). Page 8

8

Buttons with the same or similar names as the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Changes the spectrum analyzer display.

Switches between stereo or monaural FM reception.

Selects a Multiplex mode.

CD: selects Shuffle, Programmed playback, etc.

Adjusts the echo level for CD function.

3 r

t

7

8

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.

9

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

0

Select a disc.

! c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

@

Plays back a VCD slowly while held down.

#

+

-

Adjusts the volume.

$

Clears a track of the CD programed playback and a Radio
preset station.

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
VCD: goes to the next/previous page or scene.
DIGEST: Activates the Digest playback function when
playback a VCD.
ZOOM: Enlarge VCD picture during pause.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

-

+

7

&

MP3: selects a previous album or a succeeding album.
CD: adjust the playback sound key for CD function

5

Manually turns the PBC function on and off for a PBC
disc.

Marks a desired point when playing back a VCD.

Displays disc information such as the elapsed playback
time on the TV screen.

6

Enters timer setting mode.

Use the remote.

1 Press CLOCK/TIMER/SET.

Go to step 3 when the time appears and the 'hour' flashes.

2 Press  r  or  t  repeatedly until "CLOCK

SET

" appears in the display and then press

ENTER.

3 Press r or t repeatedly to set the hour

and then press ENTER.

4 Press r or t repeatedly to set the minute

and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY. The time will be displayed for 6 seconds.

Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.

If "- -:- -" appears when the unit is turned off
There has been a power interruption. Reset the clock.

 Enters CD repeat playback mode.

Switches the sleep-timer on/off and selects the duration.

Selects BASS or TREBLE setting mode

Selects timer playback, timer recording or timer off.