CX-JV3, JAX-V3 - Sony Audio Service Manual (repair manual). Page 7

7

4 #

Connect the speaker cord of the supplied front speakers
here.

5

Outputs video signals. Connect to the video input jack
of your TV set with the supplied video connecting cord.
Select the appropriate video input on your TV. Refer to
the operating instructions of your TV.

6

Switches AC voltage according to your local voltage.
Make sure it matches your local voltage.

7

This section is extracted from
instruction manual.

1

Rotates the CD trays.

2

6

Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.

3

Selects various modes (ECO and Repeat/Shuffle/
Programed playback, etc.) when used in combination with
ENTER and MULTI JOG.

4

Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.

5

When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: selects a reverse mode and specifies tape length.
Clock and Timer: sets the time.
i-Bass: selects a frequency range.
Spectrum analyzer, ECO and Dimmer: selects the mode.

6

Adjusts the microphone volume.

Connects the microphone here.

7

Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.

@

Receives a signal from the remote.

#

Adjusts the volume.

$

Enhances high frequency sound.

8

Starts dubbing a whole tape.
w

Starts recording.

9

Selects a disc.

0 z

Opens or closes the disc compartment.

!

Selects Tape function, and deck A or B.

Selects Tuner function and the radio band.

Selects the function of external equipment connected to
VIDEO/AUX jacks.

Selects CD function.

% c

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s

v

CD and Tape: stops playback.
Tuner: clears a station preset.
f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a

CD and Tape: pauses playback.
Tuner: stores the received station in to preset.

^

Emphasizes low frequency sound.

&

Produces rich and clear low frequency sound.

*

Displays the time and the remaining time for CD.

-

+

Selects a previous album or a succeeding album with
MP3-CDs.

1

Sets the color system of the video signal output via the
VIDEO OUT jack. Turn off the power, and then set the
switch according to your TV set;
- PAL: When connecting to a PAL system TV.
- NTSC: When connecting to a NTSC system TV.
- AUTO: When connecting to a multi color system TV.

• In case of setting the switch to "AUTO", you need to

adjust the color system according to your VCD to play
back. Hold down CD button for about 6 seconds in stop
mode in CD function, and "PAL" (initial) or "NTSC"
appears on the display (except when the loaded disc is
MP3-CD).
When playing back a PAL VCD, hold down CD and
release it when "PAL" appears.
When playing back a NTSC VCD, do the same procedure
and release it when "NTSC" appears.
When the function is changed or the unit is turned off,
PAL is resorted.

• This unit does not support color systems other than

PAL and NTSC, such as NTSC 4.43 or SECAM.

• If there is a color or picture trouble in the AUTO mode,

select NTSC or PAL.

2

Ω

Plug in the supplied AM and FM antennas here.

3

Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.

Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".

Outputs analog sound signals to external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
When the function is set to "VIDEO", "AUX" or "TV",
no signal is output from the REC OUT jacks.