CX-JN101, JAX-N101 - Sony Audio Service Manual (repair manual). Page 8

8

Buttons with the same or similar names with the main unit
basically have the same function.

1

2

CD: selects a CD track of the specified number.
Tuner: tunes in to the station with the specified preset
number.

The numbered buttons take on these functions below when pressed
with SHIFT held down

:

Enters AI Edit Recording or Programed Edit Recording
mode when pressed in stop mode.

Selects Tuner function and the radio band.

Switches between stereo or monaural FM reception.

Selects a Multiplex mode.

3 r

t

CD: selects a track.
Tuner: selects a preset station.
Tape: specifies tape length.
BASS and TREBLE: adjusts the level.
Clock and Timer: sets the time.

4

Selects Shuffle or Programed playback in CD function.

 Enters CD repeat playback mode.

5

Enters timer setting mode.

Selects timer playback, timer recording or timer off.

6

Displays the time and the remaining time for CD.

7

Hold down when pressing a numbered button to change
its function to that printed above the number.
e.g.)
"Press  SHIFT+BAND on the remote" indicates "Hold
down SHIFT and press '2' (BAND)". Doing so makes you
be able to select Tuner function and the radio band.
You can first press SHIFT, then a numbered button.

8

Switches the active function among CD, TAPE, TUNER
and VIDEO (AUX or TV).

9

Select a disc.

0 c

d

When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.

s

CD and Tape: stops playback.

f

g

CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.

a

CD and Tape: pauses playback.

!

Switches the sleep-timer on/off and selects the duration.

@

+

-

Adjusts the volume.

#

Selects BASS or TREBLE setting mode

Clears a track of the CD programed playback and a Radio
preset station.

The buttons not explained above (

 N, M and

) do not operate for this unit.

Refer to the pages indicated in parentheses for details.

Use the remote.

Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.

Press  r  or  t  repeatedly until "CLOCK
SET

" appears in the display and then press

ENTER.

Press r or t repeatedly to set the hour
and then press ENTER.

Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.

•MULTI JOG is also available in place of r or t.

To display the time
Press DISPLAY on the remote. The time will be displayed for
6 seconds.

Tip:
"AM 12:00" indicates midnight and "PM 12:00" noon.

If "- -:- -" appears when the unit is turned off
There has been a power interruption. Re-set the clock.