Read Sony CX-JN101 / JAX-N101 Service Manual online
7
CX-JN101
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
GB
1
DISC CHANGE
Rotates the CD trays.
2
POWER
6
STANDBY/ON
Switches the unit on and off (standby).
The red indicator flashes when receiving a signal from
the remote.
The red indicator flashes when receiving a signal from
the remote.
3
MODE
Selects various modes (ECO and Repeat/Shuffle/
Programed playback or Dimmer) when used in
combination with ENTER and MULTI JOG.
Programed playback or Dimmer) when used in
combination with ENTER and MULTI JOG.
4
ENTER
Fixes the modes and the time (ECO, Repeat/Shuffle/
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
Programed playback, clock, and timer, etc.) when used
in combination with ENTER and MULTI JOG.
CD
Selects CD function.
@
Remote sensor
Receives a signal from the remote.
#
VOLUME
Adjusts the volume.
$
TREBLE
Enhances high frequency sound.
%
BASS
Emphasizes low frequency sound.
^
i-Bass
Produces rich and clear low frequency sound.
& c
PLAY/PRESET
When the unit is turned off: activates or deactivates
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
DEMO.
CD and Tape: starts playback.
Tuner: tunes into a preset station.
s
STOP/CLEAR
CD and Tape: stops playback.
Tuner: clears a station preset.
Tuner: clears a station preset.
f
TUNING DOWN,
g
TUNING UP
Main unit: front
Refer to the pages indicated in parentheses for details.
5
MULTI JOG
When used in combination with ENTER and MULTI JOG,
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
ECO and Dimmer: selects the mode.
CD: selects a track and Repeat/Shuffle/Programed
playback.
Tuner: selects a preset station.
Tape: specifies tape length.
Clock and Timer: sets the time.
ECO and Dimmer: selects the mode.
6
MIC MIXING
Adjusts the microphone volume.
MIC jack
Connects the microphone here.
7
PHONES jack
Plug in here an optional headphones set with a mini
stereo plug (ø3.5 mm). Speaker output is canceled.
stereo plug (ø3.5 mm). Speaker output is canceled.
8
SYNC DUB
Starts dubbing a whole tape.
w
REC/REC MUTING
Starts recording.
9
DISC DIRECT PLAY 1-3
Selects a disc.
0 z
OPEN/CLOSE
Opens or closes the disc compartment.
!
TAPE A/B
Selects Tape function, and deck A or B.
TUNER/BAND
Selects Tuner function and the radio band.
VIDEO/AUX
Selects the function of external equipment connected to
VIDEO/AUX jacks.
VIDEO/AUX jacks.
CD: searches a track in fast forward or fast reverse
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
playback when held down.
Tape: fast forwards or rewinds the tape.
Tuner: manually tunes down or up within the band.
a
PAUSE/SET
CD and Tape: pauses playback.
Tuner: stores the received station in to preset.
Tuner: stores the received station in to preset.
Main unit: rear
Refer to the pages indicated in parentheses for details.
1
AM LOOP, FM 75
Ω
terminals
Plug in the supplied AM and FM antennas here.
2
VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER
on the unit. Repeat the procedure to select "VIDEO",
"AUX" or "TV".
3 #
SPEAKER terminals
Connect the speaker cord of the supplied front speakers
here.
here.
4
AC voltage selector
(E, Singapore models)
Switches AC voltage between 110 - 120V and 220 - 240V.
Make sure it matches your local voltage.
Make sure it matches your local voltage.
5
AC power cord
Click on the first or last page to see other CX-JN101 / JAX-N101 service manuals if exist.