Read Sony CMT-SE9 / MDS-SE9 Service Manual online
5
MDS-SE9
One of the following messages may appear or
flash in the display during operation.
flash in the display during operation.
Messages
MD
Analog REC
The MD deck starts the analog recording.
Assign None
All the tracks on an MD are registered into groups.
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
silence continued for 30 seconds or more during
digital recording.
Blank Disc
The inserted recordable MD is new, or all tracks on
the MD have been erased.
the MD have been erased.
Cannot Edit
• A pre-mastered MD is in the deck.
• You tried to edit in Program or Shuffle Play mode.
• The track is recorded in MDLP mode.
Cannot REC
• A pre-mastered MD is in the deck.
• The function is switched to MD.
Cannot SYNC!
• There is no disc in the MD deck, or the MD is
protected against erasure.
• There is no time remaining on the MD.
Complete!
The editing operation of the MD is completed.
Disc Full!
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
Group Full!
An attempt was made to create a new group in
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
excess of the maximum number of groups, or there
are insufficient characters for updating the group
management information.
Impossible
• You tried to make an impossible editing
operation.
• You cannot perform Net MD operations during
timer playback.
• You cannot combine or erase the tracks due to the
system limitations of MDs.
Incomplete!
Adjustment of the recording level after recording or
Fade-in and Fade-out procedures have failed since
the system was either subject to vibration or there is
a damaged or dirty disc in the tray.
Fade-in and Fade-out procedures have failed since
the system was either subject to vibration or there is
a damaged or dirty disc in the tray.
Initialize
The power was off for a long time, so the system is
initializing itself.
initializing itself.
Name Full!
There is no more space to store track, disc or group
titles.
titles.
No Change
While attempting to change the recording level after
recording, you pressed ENTER without actually
changing the recording level, so no ch ange was
made.
recording, you pressed ENTER without actually
changing the recording level, so no ch ange was
made.
No Disc
There is no disc in the MD deck.
OVER
You have reached the end of the MD while pressing
M during pause mode.
M during pause mode.
Push STOP!
You pressed an invalid button during playback,
pause, recording or recording pause.
pause, recording or recording pause.
Reading
The MD deck is reading the TOC information of the
MD.
MD.
—Rehearsal—
The MD is playing the specified point for
confirmation during the A-B Erase Function and the
Divide Function.
confirmation during the A-B Erase Function and the
Divide Function.
S.F Edit!
You attempted to perform another operation while
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
S.F Edit NOW
You pressed ?/1 while in S.F Edit (changing the
recording level after recording, Fade-in, Fade-out)
mode.
recording level after recording, Fade-in, Fade-out)
mode.
Smart Space
The signal was input again after silence continued
for 3 or more but less than 30 seconds during digital
recording, and the silence was cut to 3 seconds.
for 3 or more but less than 30 seconds during digital
recording, and the silence was cut to 3 seconds.
Step Full!
You tried to program 26 or more tracks (steps).
TOC Writing
The MD deck is writing the information of recorded
or edited contents.
or edited contents.
Click on the first or last page to see other CMT-SE9 / MDS-SE9 service manuals if exist.