CMT-SE7, HCD-SE7 - Sony Audio Service Manual (repair manual). Page 6

6

The power was off for a long time, so the system is 
initializing itself.

There is no more space to store track, disc or group 
titles.

While attempting to change the recording level after 
recording, you pressed ENTER/YES without 
actually changing the recording level, so no change 
was made.

There is no disc in the MD deck.

You have reached the end of the MD while pressing 
M during pause mode.

You pressed an invalid button during playback, 
pause, recording or recording pause. 

The MD deck is reading the TOC information of the 
MD.

The MD is playing the specified point for 
confirmation during the A-B Erase Function and the 
Divide Function (pages 55 and 58).

A reading failure has occurred, and the system is 
trying to read the data again.

You attempted to perform another operation while 
in S.F Edit (changing the recording level after 
recording, Fade-in, Fade-out) mode.

You pressed ?/1 while in S.F Edit (changing the 
recording level after recording, Fade-in, Fade-out) 
mode.

The signal was input again after silence continued 
for 3 or more but less than 30 seconds during digital 
recording, and the silence was cut to 3 seconds.

You tried to program 26 or more tracks (steps).

The MD deck is writing the information of recorded 
or edited contents.

You have reached the end of the track while 
adjusting the dividing point during the Divide 
Function.

Tracks and other data that have been checked out on 
Net MD equipment are protected, so you cannot use 
some of the MD editing functions.

The Play Timer and the recording timer start and 
end times are set to the same time.

The Play Timer setting or the recording timer setting 
overlaps with part or all of another timer setting.

You tried to set the clock or timer during timer 
operation.

You tried to select the timer with the clock not set.

You tried to select the timer with the timer not set.

The personal computer is preparing the amount of 
data needed for playback while using the WEB 
RADIO function.

You pressed NET MD on the unit during Check-In 
or Check-Out. Wait until the operation is 
completed.

You tried to pause a music file or a broadcast station 
that cannot be paused while using the MUSIC 
LIBRARY or WEB RADIO function.

You tried to play the music file that cannot be 
played while using the MUSIC LIBRARY function.

The USB cable is not connected properly. Check the 
connection.

Check-In and Check-Out is underway.