CMT-GPX9DAB, HCD-GPX9 - Sony Audio Service Manual (repair manual). Page 20

Read Sony CMT-GPX9DAB / HCD-GPX9 Service Manual online

20
HCD-GPX9
[CD  REPEAT  5  LIMIT  CANCEL  MODE]
Number of repeat for CD playback is 5 times when the repeat mode
is “REPEAT”. This mode enables CD to repeat playback for limitless
times.
Procedure:
1. Press the  
I/
1
  button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press three buttons of  
m
  (CD),  
x
  (TAPE), and [DSGX]
simultaneously.
4. It enters the CD repeat 5 limit cancel mode and display “LIMIT
OFF”
5. To release this mode, press the  
I/
1
  button to turn the power
off.
[CD  SHIP  MODE]
This mode can run the CD sled motor optionally. Use this mode,
for instance, when cleaning the optical pick-up.
Procedure:
1. Press the  
I/
1
  button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press three buttons of [TUNING MODE],  
x
  (CD),
and  
I/
1
  simultaneously. *1
4. Set to the CD ship mode. (chucking on)
5. After blink “STANDBY”, “LOCK” is displayed, disconnect
the AC plug.
*1) If press three buttons of [DIRECTION],  
u
    (CD), and
[DSGX] simultaneously, Activate the CD ship mode and
MC cold reset.
[CD  SLOT  LOCK]
This mode is for the antitheft of CD disc in shop. (not for transport)
Procedure:
1. Press the  
I/
1
  button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Insert a disc.
4. While pressing the  
x
  (CD) button, press the  
A
  (CD) button
for more 5 seconds.
5. The message “LOCKED” is displayed and the disc slot is
locked. (Even if exiting from this mode, the disc slot is still
locked)
6. If press the 
A
  (CD) button to eject the disc, the message
“LOCKED” is displayed and can not eject the disc.
7. To release this lock, while pressing the  
x
  (CD) button, press
the  
A
  (CD) button for 5 seconds again.
8. The message “UNLOCKED” is displayed and the disc slot is
unlocked.
[CD  POWER  MANAGE]
This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:
1. Press the  
I/
1
  button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press the  
I/
1
  button again to turn the power off (standby).
4. While pressing the  
x
  (CD) button, press the  
I/
1
  button.
5. It turns power on and display “CD POWER”, then display
“ON” or “OFF”.
Page of 70
Display

Click on the first or last page to see other CMT-GPX9DAB / HCD-GPX9 service manuals if exist.