Read Sony CMT-BX3R / CMT-BX4R / HCD-BX3R / HCD-BX4R Service Manual online
14
HCD-BX3R/BX4R
CD POWER MANAGE
This mode is used to changed over CD power on/off for decreasing
of reception noise in the tuner mode.
Procedure:
of reception noise in the tuner mode.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the [CD] button on the remote commander to select “CD”.
3. Press the
3. Press the
I/
1
button again to turn the power off.
4. Press two buttons of
x
/CANCEL
and
I/
1
simultaneously.
5. The message “CD POWER ON” or “CD POWER OFF”is
displayed on the liquid crystal display, and CD power on/off
is changed over in the tuner mode.
is changed over in the tuner mode.
CD SERVICE MODE
This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
instance, when cleaning the optical pick-up.
Procedure:
1. Press the
I/
1
button to turn the power on.
2. Press the [CD] button on the remote commander to select “CD”.
3. Press three buttons of
3. Press three buttons of
x
/CANCEL
,
CD
u
and
Z
simul-
taneously, the message “SERVICE M” is displayed on the liq-
uid crystal display.
uid crystal display.
4. Press the [TUNE ---] button to move the optical pick-up to inside
track and the message “SLED IN” is displayed on the liquid
crystal display, or press the [TUNE +] button to outside track
and the message “SLED OUT” is displayed on the liquid
crystal display.
crystal display, or press the [TUNE +] button to outside track
and the message “SLED OUT” is displayed on the liquid
crystal display.
5. Press the
CD
u
button, “LD ON” or “LD OFF” is displayed
on the liquid crystal display. Each time
CD
u
button is
pressed, laser diode on/off is changed over.
6. To release this mode, press the
I/
1
button.
Click on the first or last page to see other CMT-BX3R / CMT-BX4R / HCD-BX3R / HCD-BX4R service manuals if exist.