Read Sony CMT-101 / HCD-101 / TC-TX101 Service Manual online
— 10 —
5) Pressing [TUNING–] and [VOL+] at the same time :
• Aging mode
The machine enters the aging mode by inserting a CD disc
and performing the above button
operation. The display starts counting the aging operation
with COUNT display, and “REPEAT” flashes.
and performing the above button
operation. The display starts counting the aging operation
with COUNT display, and “REPEAT” flashes.
Aging operation
1. Machine takes a disc into the machine.
2. Reads the TOC.
3. Accesses to the last track.
4. Plays back the last 2 seconds.
5. Ejects the disc.
2. Reads the TOC.
3. Accesses to the last track.
4. Plays back the last 2 seconds.
5. Ejects the disc.
The one complete operation from step 1 to step 5 is one count.
The cycle is repeated. However, steps 2 to 4 are skipped in all
modes other than the CD function.
Steps 1 and 5 are skipped in the no CDM mode.
The cycle is repeated. However, steps 2 to 4 are skipped in all
modes other than the CD function.
Steps 1 and 5 are skipped in the no CDM mode.
The aging operation ends when an error occurs.
Aging error display
“Load Error”
Aging error display
“Load Error”
: Loading operation is not completed in four
seconds.
“Eject Error”
: Eject operation is not completed in four
seconds.
“Q TOC Err”
: The Q data could not be read during eight
seconds. (During TOC read)
“Q SRCH Err”
: The Q data could not be read during eight
seconds. (During track search)
“Q PLAY Err”
: The Q data could not be read during eight
seconds. (During PLAY)
“FOK UP Err”
: Focus could not be locked in. (During
setup)
“FOK TOC Err”
: Focus is un-locked many times. (During
TOC read)
“FOK SRCH Err” : Focus is un-locked many times. (During
track search)
“FOK PLAY Err” : Focus is un-locked several times. (During
play)
“GFS UP Err”
: GFS error. (During setup)
“GFS TOC Err”
: GFS error. (During TOC read)
“GFS PLAY Err” : GFS error. (During play)
Display selection during aging
The display can be switched by pressing the [TUNING–] and
[FUNCTION] at the same time :
The display can be switched by pressing the [TUNING–] and
[FUNCTION] at the same time :
Count display
Elapsed time display
Other errors
Normal display
Example of display
" COUNT
723 "
(Machine has repeated for 723 times.)
"
12 : 05 : 35 "
(12 hours 5 minutes 35 seconds have elapsed.)
" TW 2
SW 1 "
** Other troubles
“TW*SW*”
TW : Numbers of times that the machine could not read
TOC.
SW : Numbers of times that the machine could not
complete the track search within 16 seconds.
To exit the aging mode and to return the TEST mode, press
[TUNING – ] and [VOL +] at the same time.
[TUNING – ] and [VOL +] at the same time.
Click on the first or last page to see other CMT-101 / HCD-101 / TC-TX101 service manuals if exist.