Read Sony CMT-101 / HCD-101 / TC-TX101 Service Manual online
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
!
OR DOTTED LINE WITH
MARK
!
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
TABLE OF CONTENTS
1.
GENERAL
······································································ 3
2.
DISASSEMBLY
2-1.
Case ···················································································· 4
2-2.
Front Panel Section ···························································· 4
2-3.
PRE Board ·········································································· 5
2-4.
Function board, Relay board, SP TM board, Trans board,
Power board ········································································ 5
Power board ········································································ 5
2-5.
Mechanism Deck ································································ 6
2-6.
Chassis (T2) Assy ······························································· 6
2-7.
BD Board ············································································ 7
2-8.
Roller Arm Block Assy ······················································· 7
2-9.
Chassis (OPT), Chucking Arm Assy ·································· 8
2-10. Motor (SL) Assy (M102), Optical Pick-Up ························ 8
3.
TEST MODE
·································································· 9
4.
ELECTRICAL ADJUSTMENT
······························ 11
5.
DIAGRAMS
5-1.
Circuit Boards Location ··················································· 14
5-2.
Block Diagram ································································· 15
5-3.
Schematic Diagram –BD Section– ··································· 18
5-4.
Printed Wiring Board –BD Section– ································ 21
5-5.
Printed Wiring Board –Panel Section– ····························· 23
5-6.
Schematic Diagram –Panel Section – ······························ 25
5-7.
Printed Wiring Board –PRE Section– ······························ 27
5-8.
Schematic Diagram –PRE Section– ································· 29
5-9.
Printed Wiring Board –Function Section– ······················· 31
5-10. Schematic Diagram –Function Section– ·························· 33
5-11. Printed Wiring Board –Power Section– ··························· 36
5-12. Schematic Diagram –Power Section– ······························ 39
5-13. IC Pin Function ································································ 42
5-14. IC Block Diagrams ··························································· 44
5-11. Printed Wiring Board –Power Section– ··························· 36
5-12. Schematic Diagram –Power Section– ······························ 39
5-13. IC Pin Function ································································ 42
5-14. IC Block Diagrams ··························································· 44
6.
EXPLODED VIEWS
6-1.
Front Panel Section ·························································· 47
6-2.
Chassis Section ································································· 48
6-3.
Mechanism Deck Section-1 (CDM50) ····························· 49
6-4.
Mechanism Deck Section-2 (CDM50) ····························· 50
7.
ELECTRICAL PARTS LIST
··································· 51
Outputs
VIDEO/PC OUT jack : Stereo phone
jack, 250mV, 1k
jack, 250mV, 1k
Ω
DIGITAL OUT (CD OPTICAL OUT):
Square optical connector jack, –18dBm,
wave jength 660nm
PHONES (headphones) jack :
Stereo mini jack, accepts head phones of
8
Square optical connector jack, –18dBm,
wave jength 660nm
PHONES (headphones) jack :
Stereo mini jack, accepts head phones of
8
Ω
or more.
General
Power requirements
European model
220–230V AC, 50/60Hz
Other models
110–120V or 220–240V
AC, 50/60Hz adjustable
with voltage selector
AC, 50/60Hz adjustable
with voltage selector
Power consumption
66W (when connected to TC-TX101,
MDS-MX101)
MDS-MX101)
Dimensions
Approx. 142
×
125
×
260mm (w/h/d) incl.
projecting parts and controls
Mass
Approx. 4.1kg
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be damaged
by heat.
by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of soldering iron around 270 ˚C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering or
unsoldering.
unsoldering.
SERVICE NOTE
Click on the first or last page to see other CMT-101 / HCD-101 / TC-TX101 service manuals if exist.