Read Sony CFD-E90 Service Manual online
7
CFD-E90
8
Playing a tape
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press n.
The player turns on (direct power-on)
and starts playing.
The player turns on (direct power-on)
and starts playing.
With the side you want
to play facing you
Display
2
1
Basic Operations
9
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +*, —
(VOL +, — on the remote)
(VOL +, — on the remote)
stop playback
xZ
fast-forward or rewind the tape
m
or M
pause playback
X
Press the button again to
resume play after pause.
resume play after pause.
eject the cassette
xZ
turn on/off the player
POWER
* VOLUME + and n have a tactile dot.
xZ
X
m
, M
POWER
VOLUME +, —
10
Recording on a tape
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the program source you want
to record.
To record from the CD player, insert
a CD and press x on the CD section.
to record.
To record from the CD player, insert
a CD and press x on the CD section.
To record from the radio, tune in the
station you want.
station you want.
3
With the side you want to
record on facing you
Display
1
Basic Operations
11
3
Press z to start recording
(n is depressed automatically).
(n is depressed automatically).
Use these buttons for additional operations
Tips
¥ Adjusting the volume or the
audio emphasis will not
affect the recording level.
affect the recording level.
¥ If the AM program makes a
whistling sound after you’ve
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press FUNCTION on the
remote repeatedly until
TAPE appears.
3 Press z.
xZ
X
POWER
MODE
n
To
Press
stop recording
xZ
pause recording
X
Press the button again to resume
recording.
recording.
turn on/off the player
POWER
¥ If the AM program makes a
whistling sound after you’ve
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press FUNCTION on the
remote repeatedly until
TAPE appears.
3 Press z.
Click on the first or last page to see other CFD-E90 service manuals if exist.