Read Sony CFD-E90 Service Manual online
6
CFD-E90
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
4
Connect the supplied AC power cord.
1
Press ZPUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
to open the CD compartment and
place the CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u.
The player turns on (direct power-on)
and plays all the tracks once.
The player turns on (direct power-on)
and plays all the tracks once.
Basic Operations
3
Playing a CD
Display
With the label side up
1, 2
Playing time
Track number
Basic Operations
5
Use these buttons for additional operations
POWER
x
u
Jog dial
VOLUME +, —
Z
PUSH
OPEN/CLOSE
To
Do this
adjust the volume
Press VOLUME +*, — (VOL +, —
on the remote).
on the remote).
stop playback
Press x.
pause playback
Press u*.
Press the button again to resume
play after pause.
Press the button again to resume
play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
(On the remote, press >.)
go back to the previous track Turn the jog dial counterclockwise.
(On the remote, press ..)
remove the CD
Press ZPUSH OPEN/CLOSE.
turn on/off the player
Press POWER.
* The button has a tactile dot.
6
Listening to the radio
Connect the supplied AC power cord.
1
Press RADIO¥BAND¥AUTO
PRESET until the band you want
appears in the display (direct power-
on).
PRESET until the band you want
appears in the display (direct power-
on).
2
Hold down TUNE + or TUNE — until
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
the button repeatedly to change the
frequency step by step.
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
the button repeatedly to change the
frequency step by step.
Display
Indicates an FM stereo
broadcast
1
2
Basic Operations
7
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +*, —
(VOL +, — on the remote)
(VOL +, — on the remote)
turn on/off the radio
POWER
* VOLUME + has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
Reorient the antenna for FM. Reorient the player itself for
AM.
for FM
for AM
Tip
If the FM broadcast is
noisy, press MODE until
noisy, press MODE until
Mono appears in the
display and the radio will
play in monaural.
play in monaural.
POWER
VOLUME +, —
MODE
Click on the first or last page to see other CFD-E90 service manuals if exist.