Read Sony CFD-616 Service Manual online
– 6 –
9. INSTALLING THE SLIDER (F1) ASSY
1) Fit the two claws onto the chassis.
2) Have the shaft fit is the groove on the slider (F1) assy.
2) Have the shaft fit is the groove on the slider (F1) assy.
(Hold the CH holder assy and have the shaft fit.)
3) Make sure that the pin fits in the lever (F).
10. INSTALLING THE STOCKER
1) Install the tray to the stocker.
2) Fit the disc guard in the groove on the CH holder.
3) Install the stocker.
2) Fit the disc guard in the groove on the CH holder.
3) Install the stocker.
(The slider (F1, F2) assemblies should be in the
inside of stocker.)
inside of stocker.)
4) Install the steel ball and click spring (F) and tighten
with screw.
5) Install the CD stop plate and tighten with two screws.
6) Install two screws.
6) Install two screws.
BVTP 2.6x10
CD stop plate
BVTP 2.6x8
disc guard
slider (F1) assy
BVTP 2.6x8
click spring (F)
slider (F2) assy
steel ball
stocker
slider (F1) assy
claw
claw
pin
shaft
lever (F)
chassis
CH holder assy
groove
Click on the first or last page to see other CFD-616 service manuals if exist.