Read Sony CFD-616 Service Manual online
– 3 –
3. INSTALLING THE CHASSIS (1)
1) Put the level (F) to position
A
.
(Position so that the claw on ST detection lock lever assy
is in the middle of the groove on lever (F).)
is in the middle of the groove on lever (F).)
2) Turn the gear (L1) in the arrow direction, and move the
slider (L) in the arrow direction.
3) Make sure that when the gear (L1) is set in the position
shown in the figure, the ST detection lock lever assy is
moved in the direction of arrow and is not in contact
with the lever (F).
moved in the direction of arrow and is not in contact
with the lever (F).
4) Move the lever (F) from position
A
to position
B
.
4. INSTALLING THE CHASSIS (2)
slider (L)
gear (L1)
lever (F)
A
B
ST detection lock lever assy
3
BVTP 2.6x8
2
BVTP 2.6x8
4
BVTP 2.6x8
5
BVTP 2.6x8
1
chassis
Note: Install the chassis so as not to be
in contact with the slider (L).
slider (L)
Click on the first or last page to see other CFD-616 service manuals if exist.