Read Sony CFD-6 Service Manual online
– 7 –
3-5. MAGNET, CHUCKING PLATE REMOVAL
1
Screw (BVTP 3x8)
2
Chucking plate
Magnet
Holder (Chuck)
Chucking plate
1
3
2
3
Screw (+B 2.6x6)
2
Tuning dial (Knob)
Tuning shaft
Tuner board
1
(Fig. 1)
SECTION 4
DIAL POINTER INSTALLATION
Note :
Follow the installation procedure in the numerical order given.
1. Turn tuning shaft fully to arrow direction.
2. Fit tuning shaft to hole of tuning dial (knob) and then install it. (Fig. 1)
3. Fasten the tuning dial (knob) to the tuner board with the screw.
2. Fit tuning shaft to hole of tuning dial (knob) and then install it. (Fig. 1)
3. Fasten the tuning dial (knob) to the tuner board with the screw.
Click on the first or last page to see other CFD-6 service manuals if exist.