CFD-131 - Sony Audio Service Manual (repair manual). Page 2

– 2 –

This appliance is classified as
a CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.

Use of controls or adjustments or performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure.

•

Keep the temperature of the soldering iron around 270˚C during
repairing.

•

Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).

•

Be careful not to apply force on the conductor when soldering or
unsoldering.

•

Never reuse a disconnected chip component.

•

Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.

The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.

The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-up
block. Therefore, when checking the laser diode emission, observe
from more than 30 cm away from the objective lens.

On repairing CD section, playing a disc without the CD lid, use Chuck
Plate jig.
• Code number of Chuck Plate jig : X-4918-255-1

Speaker

Full range: 10 cm dia., 3.2 ohms, cone type (2)

Outputs

Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones

Power output (excluding US model)

2.3 W + 2.3 W (at 3.2 ohms, 10 % harmonic distortion)

Power requirements

120 V AC, 60 Hz (US, CND, TW model)
220 - 230 V AC, 50 Hz (AEP, IT model)
230 - 240 V AC, 50 Hz (UK model)
110 - 120 V, 220 - 240 V AC selectable, 50/60 Hz (EA model)
9 V DC, 6 R20 (size D) batteries

Power consumption

AC 25 W (TW model)
AC 20 W (Except TW model)

Battery life

For CD radio cassette-corder:

Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 19 h

Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 12 h

Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 4.5 h

Dimensions

Approx. 446

×

165

×

234 mm (w/h/d)

(17 

5/8

 

×

6 

1/2

 

×

9 

1/4

 inches) (incl. projecting parts)

Mass

Approx. 3.9 kg (8 lb. 10 oz) (incl. batteries)

Supplied accessory

AC power cord (1)

Design and specifications are subject to change without notice.

• Abbreviation
IT

: Italian model

EA

: Saudi Arabia model

CND

: Canadian model

TW

: Taiwan model

This model is used two ceramic filters of CF1 and 3.
You must use same type of color marked ceramic filters in order to
meet same specifications.
Therefore, the ceramic filter must change two pieces together since
it's supply two pieces in one package as a spare parts.

red

10.70 MHz

blue

10.67 MHz

orange

10.73 MHz

black

10.64 MHz

white

10.76 MHz

mark

CF1

CF3

Center
Frequency

mark

mark