Read Sony CDP-XE220 / CDP-XE320 Service Manual online
– 5 –
SECTION 3
DISASSEMBLY
Note :
Follow the disassembly procedure in the numerical order given.
3-1. FRONT PANEL
• In order to remove the front panel block when the power supply
does not turn on, rotate the cam with tapering driver as the figure
shows, and the loading part will be moved.
Then pull out the loading part by your hand to remove the loading
panel as the figure shows. After that take out the front panel block.
shows, and the loading part will be moved.
Then pull out the loading part by your hand to remove the loading
panel as the figure shows. After that take out the front panel block.
3-2. BASE UNIT (BU-5BD29C)
Tapering driver
Loading part
Loading panel
4
Remove the Base unit
(BU-5BD29C) to the direction
of arrow.
of arrow.
1
Turn the cam to the direction of
arrow (counter clock wise) by
tapering driver.
tapering driver.
2
Take off the disc table.
3
Yoke bracket
BU-5BD29C
Click on the first or last page to see other CDP-XE220 / CDP-XE320 service manuals if exist.