Read Sony CDP-XB820 Service Manual online
– 11 –
4-4.
AGING MODE
1. How to Enter AGING Mode
Aging method 1
(When using the aging mode remote controller (J-2501-123-A)):
1) Pess the
Aging method 1
(When using the aging mode remote controller (J-2501-123-A)):
1) Pess the
U button and turn ON the power.
2) Set the disc on the tray.
3) Press the
3) Press the
[AGING START]
button of the aging remote control-
ler.
4) Aging starts and the message shown in Fig. 1 is displayed on the
fluorescent display tube.
5) To end, press the
U button.
Aging method 2 (When no aging mode remote controller):
1) Turn on the power of the set, and insert any disc.
2) Press three buttons of
1) Turn on the power of the set, and insert any disc.
2) Press three buttons of
[MUSIC SCAN]
,
[ ªOPEN/CLOSEº]
,
and
p simultaneously, and the set goes in the AGING mode.
3) Performing the aging for a while, confirm that “ERROR” is not
displayed on the fluorescent display tube.
2. How to Exit from AGING Mode
Turn off the Power, and normal operation becomes ready.
3. Operation sequence in AGING Mode.
Fig. 1
*: In case of a failure
A faulty operation mode No. such as “ERROR-3’’ is blinking.
*: During aging, the keys on the set and the remote control A1 are
not accepted.
*: To quit the aging, turn of the power of the set.
§
Display
Operation
1
AGING-0
loading IN
2
AGING-1
Toc read
3
AGING-2
last access
4
AGING-3
last play
5
AGING-4
first access
6
AGING-5
first play
7
AGING-6
loading OUT
Contents of AGING mode
Click on the first or last page to see other CDP-XB820 service manuals if exist.