Read Sony CDP-XA555ES Service Manual online
3
SECTION 1
SERVICING NOTES
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
4-221-269-
AEP Model
: 0
s
Singapore Model : 1
s
MODEL IDENTIFICATION
– BACK PANEL –
– BACK PANEL –
HOW TO PLAY CD WITH THE DISC TRAY
OPENED
OPENED
To play a CD by this method, the screws that secure the SERVO
board to the chassis must be removed in advance.
board to the chassis must be removed in advance.
Procedure:
1. Press
1. Press
!
button to turn the power ON.
2. Set a CD on the disc tray.
3. With the disc tray opened, connect pin 1 and pin 2 of CN272
3. With the disc tray opened, connect pin 1 and pin 2 of CN272
on the LOADING MOTOR board using tweezers, etc.
4. As the disc starts to move toward direction A, intercept the
sensor in B section with your finger immediately. (See “HOW
TO OPERATE THE SET WITHOUT USING STABILIZER”
on page 5)
TO OPERATE THE SET WITHOUT USING STABILIZER”
on page 5)
5. You can release your hand when TOC is read.
6. Hence, the operation equivalent to normal operation can be
6. Hence, the operation equivalent to normal operation can be
performed.
short here
A
B
Click on the first or last page to see other CDP-XA555ES service manuals if exist.