Read Panasonic KX-TDA1186X Service Manual Supplement online
ORDER NO. KMS1501746SE
8-Port Analog Trunk with Cer ID Daughter Card (CLCOT8E)
Model No.
KX-TDA1186X
(for Europe, Asia, Oceania, Middle Near East, Latin
America and Africa)
America and Africa)
TABLE OF CONTENTS
PAGE
1 CHANGES----------------------------------------------------------- 2
1.1. Subject ------------------------------------------------------ 2
1.2. Replacement Parts List ---------------------------------- 2
1.2. Replacement Parts List ---------------------------------- 2
Supplement-1
Please file and use this supplement manual together with the service manual for Model No. KX-TDA1186X
Order No. KMS1010791CE.
Order No. KMS1010791CE.
2
KX-TDA1186X
1 CHANGES
1.1.
Subject
KX-TDA1186X
KX-TDA1186XSX
SUFFIX LOCATION
1.2.
Replacement Parts List
KX-TDA1186X/KX-TDA1186XSX
JS
KXTDA1186X
Suffix
Reason for suffix change
A to B
Change QP
B to C
Change of the MOSFET drive current due to Supplier request
C to D
Change of Main board due to Supplier request
Suffix
Reason for suffix change
B to C
Change of the MOSFET drive current due to Supplier request
C to D
Change of Main board due to Supplier request
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
Main Board Parts
R11I to R11P
R11I to R11P
ERJ3GEYJ681
ERJ3GEYJ561
RESISTOR,560
8
1
W
C
C504I to C504L,
C505I to C505L,
C604M to C604P,
C605M to C604P
C505I to C505L,
C604M to C604P,
C605M to C604P
F1LAF1020004
F1LAF1020006
CAPACITOR,1000pF
16
8
Y
D
Display
