CDP-M333ES, CDP-M555ES - Sony Audio Service Manual (repair manual). Page 15

15

• This mode is used for lighting the whole fluorescent indicator

tubes and LEDs.

Procedure:
With the power ON, while pressing the  GROUP FILE  and  MEGA
CTRL buttons, press the 

I

/

1

  button.

Rotate the  DISC/CHARACTER  knob, select “All Lit Mode” and
press the dial.
Both the fluorescent indicator tubes and LEDs will light up com-
pletely.
To end this mode, press the  

I

/

1

  mode.

• This mode is used for mechanism adjustments. Refer to the sec-

tion on Mechanism Adjustments.

• This mode is used for setting the unit to the shipment state.

Do not execute it without a proper reason as it erases the memory
of the title memo recorded by the customer.

Procedure:
Set the TIMER switch to OFF . Next, with the power ON, while
pressing the  GROUP FILE  button and MEGA CTRL button,
press the  

I

/

1

  button. If the switch state is normal, the model

name will be displayed on the fluorescent indicator tube and the
unit will set into the shipment mode.
If the various switches are not set to their designated positions,
error  will be displayed on the fluorescent indicator tube.

This mode is not required for servicing. Do not execute without a
proper reason.
If executed, the memory of the title memo recorded by the cus-
tomer will be erased.