CDP-M333ES, CDP-M555ES - Sony Audio Service Manual (repair manual). Page 13

13

1.

Turn on the power and press the  GROUP FILE ,  MEGA CTRL
and  

I

/

1

  buttons.

2.

Rotate  DISC/CHARACTER  knob, select “Normal Aging”
and press the button to start the aging mode.

3.

When the disc set mode is set, the  

H

  and  

X

  LEDs blink.

4.

Rotate the  DISC/CHARACTER  knob. The slits (No. 80, 160,
400, 240, 320) for setting the discs will come forward. Insert
the discs into these slits. Do not set the discs in other slits.

5.

Set whether the self-protection function during errors is
equipped with the unit. Press the  REPEAT  button. If
“REPEAT” is displayed on the fluorescent indicator tube, it
means the function is provided. If “REPEAT” is not displayed,
it means the function is not provided.

6.

Press the 

H

 button.

7.

The  

H

  LED blinks, the aging mode is set, and aging is started.

8.

The aging cycle lasts 3 minutes. If errors occur during aging,
the error number will be displayed on the fluorescent indicator
tube. (Refer to the following table for the details of the errors.)

9. Aging will be repeated as long as no errors occur.
10. After each aging cycle, the number displayed on the Fluorescent

indicator tube will increase.

11. To end aging, to end aging, press the  

I

/

1

  button to enter the

standby mode.

Contents

Code number

Name

The * numbers mean the following according to the state of the unit during aging

2 : From chucking to end of TOC read
3 : From end of TOC read to end of last track playback
4 : From end of last track playback to end of first track playback

# : DISC No.

The aging mode is provided with the following convenient func-

tions

• Disc setting mode (*1)
• Selection of presence of protection function during error (*2)
• Count function of aging cycle (*3)

*1 Disc setting mode:

5 discs are set before setting the aging mode. This mode makes
the setting of these discs more easy.

*2 Self protection function during errors:

Function which voluntarily corrects errors which occur during
normal operations by retries.
If this function is not provided, all operations will be stopped
without retiring. It is suitable for checking errors with low
reproducibility.
If this function is provided, and errors can be corrected by
retries, aging will be continued without stopping.

*3 Aging cycle count function:

Functions which displays the number of agings carried out on
the Fluorescent indicator tube  in numbers. One aging cycle
consists of five discs.

#Err 01

#Err 02

#Err 03

#Err 04

#Err 05

#Err 06

#Err 08

#Err 09

#Err *1

#Err *2

#Err *3

#Err *4

#Err *5

#Err *6

DISC sensor check 1

DISC sensor check 2

Table operation check 1

Table operation check 2

Loading operation check 1

Loading operation check 2

Table stop precision check 1

Table stop precision check 2

BU related check 1

BU related check 2

BU related check 3

BU related check 4

BU related check 5

BU related check 6

No disc in the specified slit

Disc in other slits

Table motor current over

No table sensor input

Load in timeover

Load out timeover

Table is not stopped within the specified time.

Stopped while both T.SENS 1 and 2 are “LOW”.

Access timeover

During high speed playback, COUNT timeout

Q data read error

]BU operation (from focus search to until signal can be read) timeover

GFS monitor error

Focus cannot be imposed by focus search