CDP-CX260 - Sony Audio Service Manual (repair manual). Page 14

– 14 –

1. Turn ON the power of the unit. Press the  § OPEN/CLOSE  and

open the front cover.

2. Change the  COMMAND MODE  switch (S901) on set to  CD1 .
3. Press the  AGING START  button of the remote commander for

aging mode (J-2501-123-A).

4. When the disc set mode is set, the  (  and  P  LEDs blink.
5. Rotate the  DISC/CHARACTER  dial. The slits (No. 40, 80,

120, 160, 200) for setting the discs will come forward. Insert the
discs into these slits. Do not set the discs in other slits.

6. Set whether the self-protection function during errors is equipped

with the unit. Press the  REPEAT  button. If “REPEAT” is dis-
played on the Fluorescent indicator tube, it means the function
is provided. If “REPEAT” is not displayed, it means the function
is not provided.

7. Press the  (  button.
8. The  (  LED blinks, the aging mode is set, and aging is started.
9. The aging cycle lasts 3 minutes. If errors occur during aging, the

error number will be displayed on the Fluorescent indicator tube.
(Refer to the following table for the details of the errors.)

10. Aging will be repeated as long as no errors occur.
11. After each aging cycle, the number displayed on the Fluorescent

indicator tube will increase.

12. To end aging, press the  1/u  button.

1 2 0

E r r 0 1

  

  

Err 01

Err 02

Err 03

Err 04

Err 05

Err 06

Err *1

Err *2

Err *3

Err *4

Err *5

Err *6

Err *7

No disc in the specified slit

Disc in other slits

Table motor current over

No table sensor input

Load in timeover

Load out timeover

Access timeover

High speed search NG

Q data read error

BU operation (from focus search to until signal can be read) timeover

GFS monitor error

Focus cannot be imposed by focus search

Auto focus bias adjustment cannot be performed

Contents

Code number

Name

DISC sensor check 1

DISC sensor check 2

Table operation check 1

Table operation check 2

Loading operation check 1

Loading operation check 2

BU related check 1

BU related check 2

BU related check 3

BU related check 4

BU related check 5

BU related check 6

BU related check 7

The * numbers mean the following according to the state of the unit during aging

2 : From chucking to end of TOC read
3 : From end of TOC read to end of last track playback
4 : From end of last track playback to end of first track playback

Disc number

Error code