Read Sony CDP-CE500 Service Manual online
CDP-CE500
4
HOW TO OPEN THE DISC TABLE WHEN POWER
SWITCH TURNS OFF
Insert a tapering driver into the aperture of the unit bottom, and
turn it in the direction of the arrow (to OUT direction).
SWITCH TURNS OFF
Insert a tapering driver into the aperture of the unit bottom, and
turn it in the direction of the arrow (to OUT direction).
– bottom view –
tapering driver
table
Note: To close the table, turn the tapering driver
in the reverse direction (to IN direction).
NOTE FOR GEAR INSTALLATION
When following gears are installed, it is necessary to phase it.
Please refer to “2-11. GEAR (RV), GEAR (U/D), SWING GEAR”
(page 12).
When following gears are installed, it is necessary to phase it.
Please refer to “2-11. GEAR (RV), GEAR (U/D), SWING GEAR”
(page 12).
CD MECHANISM DECK SERVICE POSITION
gear (RV)
swing gear
gear (U/D)
base unit block
chucking block
disc for play
CD mechanism deck
(CDM59-DA11)
(CDM59-DA11)
Connect extension jig
(1.0 mm pitch/25 cores)
(Part No. J-2501-199-A)
to USB-AUDIO board (CN902)
and BD75 board (CN403)
(1.0 mm pitch/25 cores)
(Part No. J-2501-199-A)
to USB-AUDIO board (CN902)
and BD75 board (CN403)
BD75 board
USB-AUDIO board
Note: When you do the operation check
of base unit block, please check
after installing temporary CD on
the tray.
after installing temporary CD on
the tray.
Click on the first or last page to see other CDP-CE500 service manuals if exist.