Read Sony BMZ-K1 / CX-BK1 Service Manual online
7
CX-BK1
Remote commander
Refer to the pages indicated in parentheses for details.
1
4
6
7
9
8
0
!
!
@
5
3
2
Buttons with the same or similar names on the main unit
basically have the same function.
basically have the same function.
1
POWER
2
1-9, 0/10, +10
CD: selects a track of the specified number.
Tuner: tunes in the station with the specified preset
number.
Tuner: tunes in the station with the specified preset
number.
The numbered buttons take on these functions when
pressed with SHIFT held down.
pressed with SHIFT held down.
3 c
/
d
Starts CD play.
s
a
f
/
g
r
/
t
PRESET
Tuner: selects a preset station.
M
/
N
ALBUM
Selects a previous or a succeeding album.
4
PLAY MODE
REPEAT
Selects repeat CD playback mode.
5
CLOCK/TIMER SET
Enters clock and timer setting mode.
CLOCK/TIMER SELECT
Switches timer setting on and off.
6
DISPLAY
SOUND
Selects bass, treble or middle range level setting mode.
CLEAR
Clears a track of the CD programed playback and a tuner
preset station.
preset station.
7
SHIFT
Hold down when pressing a numbered button to change
its function to that printed above the number.
its function to that printed above the number.
8
FUNCTION
9
DISC SKIP
Changes a disc slot.
0
ENTER
!
SLEEP
Selects sleep-timer mode.
@
VOLUME
+
,
-
EDIT (Chilean, Peruvian and Mexican
BAND
SPECTRUM
Changes the spectrum analyser display.
TUNER MODE
Switches between stereo or monaural FM reception.
models)
Selects edited CD recording.
KARAOKE (Chilean, Peruvian and
GEQ
Mexican models)
Selects a Karaoke mode.
Setting the clock
1 Press CLOCK/TIMER SET on the remote.
See below when to adjust the clock.
2 Press r or t to set the hour, then press
ENTER.
3 Press r or t to set the minute.
Each press changes the time in 1-minute steps.
4 Press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
00 seconds.
•MULTI JOG is also available in place of r or t.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press r or t repeatedly to display “
1 Press CLOCK/TIMER SET on the remote.
2 Press r or t repeatedly to display “
CLOCK
” and
then press ENTER.
3 Carry out steps 2 to 4 described in “Setting the clock” to set
the time.
To display the time while the power is on
Press DISPLAY repeatedly. The clock display appears in the
display for 6 seconds.
Press DISPLAY repeatedly. The clock display appears in the
display for 6 seconds.
If “
- -:- -
” appears when the unit is turned off
There has been a power interruption. Reset the clock.
Click on the first or last page to see other BMZ-K1 / CX-BK1 service manuals if exist.