Read Sony BMZ-K1 / CX-BK1 Service Manual online
5
CX-BK1
– CD mechanism deck –
• In checking the CD mechanism deck section, prepare three extension jigs (Part No. J-2501-242-A:1.00 mm 11core/
Part No. J-2501-245-A: 1.00 mm 23 core/Part No. J-2501-248-A: 1.00mm 27 core).
Note:
The CD mechanism deck of this model is a vertical type and putting it vertically as shown in the figure is the standard position.
When checking signals such as RF waveforms, operate it with the CD mechanism deck in the standard position as shown below.
When checking signals such as RF waveforms, operate it with the CD mechanism deck in the standard position as shown below.
– main board, ACDC board –
• For connecting the CD mechanism deck, prepare three extension jigs. (Refer to “– CD mechanism deck –”)
Connect the extension jig (J-2501-248-A)
to the connector board (CN701) and
the main board (CN901).
to the connector board (CN701) and
the main board (CN901).
Connect the extension jig (J-2501-242-A)
to the BD board (CN104) and the main board (CN507).
to the BD board (CN104) and the main board (CN507).
Connect the extension jig (J-2501-245-A)
to the BD board (CN102) and
the main board (CN902).
to the BD board (CN102) and
the main board (CN902).
AMP board
speaker board
PT board
ACDC board
CD mechanism deck
tuner unit
main board
front panel section
Click on the first or last page to see other BMZ-K1 / CX-BK1 service manuals if exist.