Read Sony BDV-EF200 / HBD-EF200 Service Manual online
HBD-EF200
75
Pin No.
Pin Name
I/O
Description
58
KARAOKE_MODE
I
Karaoke mode information input terminal Not used
59
MIC_CLK
O
Clock signal output terminal Not used
60
MIC_DATA
O
Serial data output terminal Not used
61
MIC_DET_OUT
O
Microphone detection signal output terminal Not used
62
Vcc
-
Power supply terminal (+3.3V)
63
S-AIR_RST
O
Reset signal output terminal Not used
64
Vss
-
Ground terminal
65
PLUG_DET
I
Calibration microphone plug insert detection signal input terminal Not used
66
S-AIR_RF_FB
I
RF feedback signal output terminal Not used
67
DRIVER_SD
I
Shut down signal input from the power amplifi er “L”: shut down
68
ACAL_OUT
I
Auto calibration output detection signal input terminal Not used
69
FE_RST_IF
O
Reset signal output terminal Not used
70
FL_CS
O
Chip select signal output to the fl uorescent indicator tube driver
71
ASEL_0
O
Audio selection signal output terminal “L”: external audio input , “H”: FM
72
ASEL_1
O
Audio selection signal output terminal Not used
73, 74
NO USE
O
Not used
75
ST_RDS_INT
I
RDS interrupt signal input from the FM receiver
76
NO USE
O
Not used
77
TS_SDA
I/O
Two-way data bus Not used
78
TS_SCL
I/O
Two-way clock bus Not used
79
ATA_PCONT2
O
Power supply control signal output terminal Not used
80
NO USE
O
Not used
81
SRS_INT
O
Reset signal output terminal Not used
82
PCONT1
O
Power supply on/off control signal output terminal “H”: power on
83
BD_RESET
O
Reset signal output to the BD decoder, NAND fl ash and EEPROM “L”: reset
84
JIG_MODE1
I
Jig mode selection signal input from the BD decoder
85
OPWRSB
I
Power control signal input from the BD decoder
86
FE_EJECT
O
Eject/stop key input detection signal output to the BD decoder
87
UPG_STATUS
I
UPG status signal input from the BD decoder
88
BD_CS
O
Chip select signal output to the BD decoder
89
ACAL_LV
I
Microphone input level detection signal input terminal Not used
90
S-AIR_DET
I
Wireless transceiver detection signal output terminal Not used
91
BD_TEMP
I
Temperature detection signal input terminal
92
DESTINATION
I
Destination setting terminal
93
MODEL
I
Model setting terminal Fixed at “L” in this unit
94, 95
KEY2, KEY1
I
Key input terminal for front panel keys
96
Vss
-
Ground terminal
97
KEY0
I
Power supply key input terminal
98
Vref
I
Reference voltage (+3.3V) input terminal
99
Vcc
-
Power supply terminal (+3.3V)
100
BD_SDO
I
Serial data input from the BD decoder
Click on the first or last page to see other BDV-EF200 / HBD-EF200 service manuals if exist.