VC-S2000 (serv.man2). Service manual page 01 to 52 - Sharp VCR Service Manual (repair manual). Page 3

Read Sharp VC-S2000 (serv.man2) Service Manual online

3
VC-S2000HM
1. SPECIFICATIONS
Format: VHS PAL / S-VHS / S-VHS ET standard
Video recording system: Two rotary heads, helical scan system
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with SHARP E-240 tape (SP mode)
480 min max. with an E-240 tape (LP mode)
720 min max. with an E-240 tape (EP mode)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (SP mode)
11.70 mm/s (LP mode)
7.8 mm/s (EP mode)
Antenna: 75 ohm unbalanced
Receiving channel: VHF Channel E2-E12, S1-S41
UHF Channel E21-E69
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC220V ~ 240V, 50Hz
Power consumption: Approx. 19W
1.5W max. (at Low power mode)
Operating temperature: 5
°
C to 40
°
C
Storage temperature: –20
°
C to 55
°
C
Weight: Approx. 4.3 kg
Dimensions: 430 mm (W) x 300 mm (D) x 91.5 mm (H)
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
Horizontal resolution: 250 lines (SP mode)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: -3.8 dBs, 10k ohm
Line 2:-3.8 dBs, 10k ohm
Line 3:-3.8 dBs, 47k ohm
Output: Line1: -3.8 dBs, 1k ohm
Line 2:-3.8dBs, 1k ohm
Hi-Fi Dynamic Range: 90 dB TYP
Hi-Fi Wow and Flutter: 0.005%
Hi-Fi Frequency Responce: 20 Hz ~ 20 kHz
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Battery
                                         Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
As part of our policy of continuous improvement, we reserve the
right to alter design and specifications without notice.
Page of 52
Display

Click on the first or last page to see other VC-S2000 (serv.man2) service manuals if exist.