Read Sharp VC-S2000 (serv.man19) User Guide / Operation Manual online
23
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
ADVANCED OPERATION
AUDIO DUBBING
PLAYING BACK AN AUDIO DUBBED TAPE
•
If you want to listen to the original and the new dubbed audio signal simultaneously, you will
need to set AUDIO MIX to ON.
need to set AUDIO MIX to ON.
•
You can change the audio output by pressing the AUDIO OUT button on the remote
control. Refer to the table below.
control. Refer to the table below.
1.
Press
MENU
, to display the main menu
on the screen.
2.
Press [
/
to select MODE.
3.
Press
SET
.
4.
Press [
/
] to select AUDIO MIX.
5.
Press [
/
] to select ON.
6.
Press
SET
, to return to the menu screen.
7.
Press
MENU
, to exit to the normal screen.
NOTES: .
AUDIO MIX
AUDIO OUT MODE
VCR DISPLAY
RESULT
ON
Hi-Fi and Mono audio
Original Hi-Fi audio (L&R
channels) and dubbed audio
Original Hi-Fi audio (L channel)
plus dubbed audio
Original Hi-Fi audio (R channel)
plus dubbed audio
•
Do not start audio dubbing until AUTO or MANUAL tracking has been completed as the
audio signal will not be recorded correctly.
audio signal will not be recorded correctly.
•
Because the audio signal is recorded onto the mono track any previous recording on
this track will be erased.
this track will be erased.
•
If AUDIO MIX in the mode menu is set to OFF, no sound will be heard during audio
dubbing.
dubbing.
AUDIO MIX
ON
OF F
16: 9
AUTO
OF F
POWERS AVE
ON
OF F
▲
▲
2/ 2
▲
▲
▲▼ :SELECT
:CHANGE
SET
:ENTER
MENU
:EXIT
MODE MENU SCREEN
▲
▲
➞
TINS-3894 ENGLISH.book Page 23 Wednesday, September 6, 2000 11:53 AM
Click on the first or last page to see other VC-S2000 (serv.man19) service manuals if exist.