VC-MH85 (serv.man16). Operation manual contents body - Sharp VCR User Guide / Operation Manual. Page 18

18

Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a 

scart lead, or audio equipment connected with audio phono leads. The VCR is normally set 

so that stereo sound is possible. The sound output from the VCR is controlled by the

button on the remote control. If you wish to change the sound output you 

can use the 

button as follows:

•

Press the 

button once. The LEFT audio channel will be sent to BOTH 

speakers.

  will appear on the VCR display.

•

Press the 

button

again. The RIGHT audio channel will be sent to BOTH 

speakers.

will appear on the VCR display.

•

Press the 

button a third time and the MONO track will be sent to BOTH 

speakers. 

and 

 will not appear on the VCR display. 

•

Pressing the 

button a fourth time, normal Hi-Fi stereo sound will be 

heard. 

and 

 will appear on the VCR display.

Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound 
is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to 
receive the mono signal. NICAM sound can be turned off. If you wish to do this follow the 
procedure below:

Press the 

 

 button to display the 

main menu on the screen.

Press the [

/

] menu select buttons to 

select MODE then press the

 

 button to 

confirm.

•

The MODE menu will be displayed with NICAM 
selected.

Press 

[

/

]to select OFF.

Press the 

 

 button to confirm and return to the main menu screen.

Press the 

 

 button to exit to normal screen.

•

If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R 

will not appear on the display.

•

lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality may be 

improved by adjusting the tracking using the 

/

 buttons.

•

If the poor quality is for a long period the VCR will automatically select the mono track 

and the sound will be in mono.

•

NICAM sound may not be stereo.

➝

TINS-A101UMZZ.book  Page 18  Thursday, July 25, 2002  2:49 PM