Read Sharp VC-MH834 (serv.man2) Service Manual online
33
VC-M314HM
VC-MH834HM
VC-MH834HM
ADJUSTMENT OF LINE3(FRONT) INPUT
Level Confirmation HIFI Lch, Rch
Level Confirmation HIFI Lch, Rch
Mode
EE
ADJUSTMENT OF Receive Image CH
Confirm that there is no noise and beat in the receiving strenght
and weakness electrics signal.
and weakness electrics signal.
Measuring
instrument
instrument
Mode
Monitor Screen
EE
Specification
<On Screen Display>
Jumper List
Jumper List
On Screen Display confirm Display
Reference
Reference
TIMER Circuit ADJUSTMENT
ADJUSTMENT OF Timer Initial JP and Y/C
Rec Current Confirmation
Rec Current Confirmation
Measuring
instrument
instrument
Mode
Cassette
Voltmeter
EE
Self-recorded tape
Test point
AUDIO OUT
Specification
-3.8
±
2dBs
VIDEO
Optional
AUDIO
AUDIO IN at 1KHz -3.8dBs
Measuring
instrument
instrument
Mode
Digital Voltmeter
EE
Specification
2.5
±
0.5V
TUNER/IF Circuit ADJUSTMENT
ADJUSTMENT OF AFT Adjustment
Confirmation(except France)
Confirmation(except France)
Test point
P1501 pin 1
TU1401 pin23
TU1401 pin23
E-12ch, Input level 70dB
µ
While selecting channel input TEST MODE(press once
on TEST KEY R/C) and select E-12ch.
on TEST KEY R/C) and select E-12ch.
(Just Tuning)
Adjustment
ADJUSTMENT OF AFT Adjustment
Confirmation(France)
Confirmation(France)
F-10ch, Input level 70dB
µ
While selecting channel input TEST MODE(press once
on TEST KEY R/C) and select F-10ch.
(Just Tuning)
on TEST KEY R/C) and select F-10ch.
(Just Tuning)
F-4ch, Input level 70dB
µ
While selecting channel input TEST MODE(press once
on TEST KEY R/C) and select F-4ch.
(Just Tuning)
on TEST KEY R/C) and select F-4ch.
(Just Tuning)
HM
I40ch
LM
I-Jch
Measuring
instrument
instrument
Mode
Digital Voltmeter
EE
Specification
2.5
±
0.5V
Test point
P1501 pin 1
TU1401 pin23
TU1401 pin23
Display eg:
JP :
0
0
3
4
3
0
0
0
1
4
HEX CODE for Initial Jumper
YC :
34
34
07
07
PAL
PAL
NTSC
NTSC
SP
LP/EP
SP
EP
VM : F8FB
←
Video Mode
NOR__
←
ROM Version
1. During EE mode, send the TEST Code (R/C code 47H)
to VCR and hold the Test code, do not let go.
2. While sending the TEST code, the monitor screen will
display the initial JP and Y/C Rec Current setting,
Video mode and ROM Version condition.
Video mode and ROM Version condition.
3. After confirmation, Release the TEST code (R/C code
47H), display will return to EE mode.
Click on the first or last page to see other VC-MH834 (serv.man2) service manuals if exist.