Read Sharp VC-MH711HM (serv.man13) User Guide / Operation Manual online
29
CUSTOMISED INSTALLATION
MANUALLY SETTING THE CLOCK
The clock will normally be set using teletext information when your VCR automatically tunes
in the broadcast channels. If for any reason teletext signals are not present your VCR will
not be able to set the clock. This procedure will allow you to set the clock manually.
in the broadcast channels. If for any reason teletext signals are not present your VCR will
not be able to set the clock. This procedure will allow you to set the clock manually.
1.Press MENU. Press [
] to select
SET UP. Press SET to confirm.
2.Press [
] to select CLOCK. Press
SET to confirm.
3.Press [
] to select either 12 or 24
hour clock.
4.Press [
] to select TIME. Enter the
time using the NUMBER BUTTONS or
[
[
]. If the minutes are less than 10,
enter the leading 0. If using the 12 hour
clock enter AM or PM by pressing
on the remote control.
clock enter AM or PM by pressing
on the remote control.
5.Press [
] to select DATE. Enter the
date using the NUMBER BUTTONS. For
example, for 1st April enter 01 04.
example, for 1st April enter 01 04.
6.Press [
] to select YEAR. Enter the
last two digits of the year using the
NUMBER BUTTONS. For example,
for1998 enter 98. For the year 2000
enter 00.
NUMBER BUTTONS. For example,
for1998 enter 98. For the year 2000
enter 00.
7.Select * for AUTO CLOCK on/off (* is
ON, - is OFF). Then press SET to
confirm.
confirm.
/
/
/
/
/
/
/
CLOCK
MODE TIME DATE YEAR
24H
12:00 1/01 00 *
MODE
:24H/12H
:SELECT ▲ ▼
:CHANGE
SET :ENTER MENU :EXIT
▲
▼
NOTE:
If AUTO CLOCK is set to OFF (- is OFF) then you will need to update the clock for
Winter/Summer daylight saving.
Winter/Summer daylight saving.
Click on the first or last page to see other VC-MH711HM (serv.man13) service manuals if exist.