VC-M315HM (serv.man7). Electrical troubleshooting guide - Sharp VCR Service Manual (repair manual). Page 7

Read Sharp VC-M315HM (serv.man7) Service Manual online

45
VC-M305HM/LM
VC-M315HM/LM
FLOW CHART NO.18 E-E MODE TROUBLESHOOTING
No picture E-E signal.
NO
NO
NO
NO
NO
YES
YES
YES
YES
Is there picture signal inputted 
in the pin (31) of IC201?
Check line between rear video input terminal and pin (31) of IC201. 
Is the supply voltage of 5V
(Y-Vcc) fed to pin(12) of 
IC201?
Check PC 5V line.
YES
Is there a picture signal 
outputted in the emitter of
Q201?
NO
Check the line between pin 
(52) of IC201 and Q201
Is there Y/C serial data and 
Y/C clock signal applied to 
pins(63) and (62) of IC201?
Check line between pins(63), 
(62) of IC201 and pins(84),
(85) of IC701.
Replace IC201.
Is there a picture signal 
inputted in the pin(49) of
IC701?
YES
NO
NO
Check peripheral circuit of 
Q251. 
YES
Is there a picture signal 
outputted in the pin(47) of
IC701?
Is there a picture signal 
outputted in the pin(52) of 
IC201?
Is there a picture signal 
outputted in the emitter of
Q251?
Check the line between pin 
(52) of IC201 and  pin (49)
of IC701
Is the supply voltage of 5V 
(OSD Vcc) fed to pin (51)
of IC701?
NO
Check PC 5V line.
YES
Is there a picture signal 
outputted at pin(25) ofIC2501?
NO
Check peripheral circuit of 
IC2501.
YES
Check the line between IC2501
peripheral and output terminal
periphery.
Page of 14
Display

Click on the first or last page to see other VC-M315HM (serv.man7) service manuals if exist.