Read Sharp TU-32GD1E (serv.man7) Service Manual online
27
TU-32GD1E
TU-37GD1E
TU-37GD1E
5
Even a single failure in the process will trigger the upgrade failure screen as shown below. The word "NG"
changes to red for the item failed.
~
In the event of a failure, repeat the upgrading process. If the process repeatedly fails, the hardware failure is
likely.
6
Upon completion of the whole process, the upgrade success screen as shown below appears. You can check
the new software version on this screen. The version information appears after the upgrade is complete.
7
Shut off the AC power to the AVC center (unplug the AC power cable), and remove the SD card for version
upgrade.
8
Now the software version upgrade is complete.
~
When you are done with the software version upgrade, start the unit, go to the top page of the adjustment
process screen and check the main software version information.
Ë
Monitor microcomputer software version upgrade
Get ready before you begin
Get ready the same items as listed in the"Main software version upgrade". In addition, the display unit whose
software is to be upgraded and the AVC center unit should also be ready.
Preparation
Create the SD card for monitor microcomputer software version upgrade in the same manner as explained in the
"Main software version upgrade". Copy the binary image file for monitor microcomputer software version upgrade
to the SD card drive.
Click on the first or last page to see other TU-32GD1E (serv.man7) service manuals if exist.