Read Sharp LC-M3700 (serv.man8) Service Manual online
32
LC-M3700
LC-M3710
LC-M3710
[How to rewrite the monitor program]
1) After entering the process adjustment mode, start up the terminal software obtained separately.
(Freeware products available on the Internet can be used.)
2) Make setting as shown below.
Baud rate: 9600
Data: 8 bits
Parity: NONE
Stop: 1 bit
Flow control: NONE
Data: 8 bits
Parity: NONE
Stop: 1 bit
Flow control: NONE
3) If the above setting is made correctly, pressing the ÅgENTERÅh key on the PC will make ÅgERRÅh appear on
the terminal software.
4) In this state, type the following. (
means the ENTER key.)
The characters displayed on the screen disappear and the screen becomes black.
IPL_0002
IPL_0002
~
Immediately after the above entry, an unusual display may be appear on the terminal software, which means no
abnormal condition.
Click on the first or last page to see other LC-M3700 (serv.man8) service manuals if exist.