Read Sharp LC-65XS1E (serv.man3) Service Manual online
LC-52XS1E/RU/LC-65XS1E/RU
3 – 2
2. Remote controller key operation in adjustment process mode.
1. key operation
Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
3. Description of display
Remote controller key
Main unit key
Remote controller key Main unit key Function
P (
/
)
P (
/
)
Moving an item (line) by one (UP/DOWN)
VOL (+/-)
VOL (+/-)
Changing a selected item setting (+1/-1)
Cursor (
/
)
—
Turning a page (PREVIOUS / NEXT)
Cursor (
/
)
—
Changing a selected line setting (+10/-10)
OK
—
Executing a function/ canceling a test pattern.
CHP1-CHP6
W/B adjustment check. It is a BETA setup about the gamma value in each adjustment point. It is off
again in the same key pressing. *Other key input is invalid in the on condition. However, it shall be
effective when other Point keys (CHP1-CHP6) are pressed.
again in the same key pressing. *Other key input is invalid in the on condition. However, it shall be
effective when other Point keys (CHP1-CHP6) are pressed.
Page specification (1-10item)
It jumps to the pressed page. The cursor position after it moves selects the first line
Line specification(1-6line)
The cursor moves to the pressed line.
Screen display
—
It is considered as monitor process mode OSD all OFF.It displays it again by another key pressing.
No. Description
Display
specification
(1)
Present page/number of total
pages
pages
2char/2char Decimal Number mark.
(2)
Page present title
Max. 15 char “[“ “]”.
(3)
Destination display
EUROPE/RUSSIA/SWEDEN
(4)
Model size
65/52
(5)
Item name
Max. 30 char
(6)
Parameter
Max. 60 char
(1) Present
㵘page / number of total pages
(3)Destination display
(2) Page present title
(4) Model size
1/
46
[INFO]
INPUT1
AUTO
EURO
65E_UNDER[0]
Process menu header
MONITOR MAIN Version
1.10 (E 2008/09/03 1)
NONITOR BOOT Version
1.01
Monitor SUB Version
1.05
FRC Version
71716531
LED A/MAIN/SUB version
0808236501/1.0.0/1.0.0
CPLD/FPGA Version
a3 / 46
EQ DATA CHECKSUM
ROM
LAMP ERROR
0
MONITOR SUB ERR CAUSE
00 00 00 00
NORMAL STANDBY CAUSE
0
ERROR STANDBY CAUSE
1) 0
2) 0
3) 0
0H 0M
0H 0M
0H 0M
4) 0
5) 0
0H 0M
0H 0M
(5) Item name
㩿㪍㪀㩷㪧㪸㫉㪸㫄㪼㫋㪼㫉
Click on the first or last page to see other LC-65XS1E (serv.man3) service manuals if exist.