LC-65GD1E (serv.man5) - Sharp TV User Guide / Operation Manual. Page 9

Read Sharp LC-65GD1E (serv.man5) User Guide / Operation Manual online

7
System cable
AVC System (rear view)
AC cord
Display (rear view)
System cable
(GREY)**
Connect the plug firmly until the hooks on
both sides click.
(WHITE)*
Connect the plug into the terminal and secure
it by tightening the thumb screws.
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Preparation
Press down the six
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
• To comply with the requirements of the CE regulation rules, make sure to attach the terminal cover to the rear of the
display with all the system cables connected before you use this product.
NOTE
* When you unplug the WHITE system cable, make sure you unscrew the screws thoroughly before unplugging the cable.
** When you unplug the GREY system cable, press the hooks on both sides of the cable inward as you unplug the cable gently.
Press the two hooks
toward the centre of the
Display and remove the
cover toward you.
(GREY)
(BLACK)
(BLACK)
Cable tie
Tie up the black and grey
cables after inserting
system cables. (Follow
instructions for preventing
cables from being pulled
out.)
(GREY)
(BLACK)
(WHITE)
AC cord
System cable
LC-65GD1E(E)-a
05.9.21, 7:20 AM
7
Page of 79
Display

Click on the first or last page to see other LC-65GD1E (serv.man5) service manuals if exist.