Read Sharp LC-65GD1E (serv.man5) User Guide / Operation Manual online
10
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal and the system cable
from the Display.
from the Display.
CAUTION
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the System.
• Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
• Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
Preparation
NOTE
• To attach the stand, perform the above steps in reverse order.
2
Unfasten the eight screws
used to secure the stand
in place.
used to secure the stand
in place.
1
Unfasten the four screws
used to secure the bracket
in place.
used to secure the bracket
in place.
3
Detach the stand from the
Display. (Hold the stand so
it will not drop from the
edge of the base area.)
Display. (Hold the stand so
it will not drop from the
edge of the base area.)
4
Attach the stand hole
covers (supplied with the
product).
covers (supplied with the
product).
Removing speakers
NOTE
• To attach the speakers, perform the steps in reverse order.
• Perform the same steps for the left section of the speaker.
• Perform the same steps for the left section of the speaker.
CAUTION
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount it.
• Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
• Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
1
2
3
Unfasten the screws.
Take off the speaker terminal cover.
Disconnect the cable from the speaker.
1
1
2
LC-65GD1E(E)-b
05.9.21, 7:22 AM
10
Click on the first or last page to see other LC-65GD1E (serv.man5) service manuals if exist.