Read Sharp LC-65GD1E (serv.man5) User Guide / Operation Manual online
25
Basic adjustment settings (Analogue)
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
Booster
[Off]
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
–
_
I
S
.
J
T
0
1
2
3
4
5
6
7
8
9
Labelling menu
Press a/b/c/d to select each character of the new
name for the channel, and then press OK.
Repeat the above until the name is fully spelt out.
name for the channel, and then press OK.
Repeat the above until the name is fully spelt out.
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select “END”,
• If a channel name is less than 5 characters, select “END”,
then press OK.
Labelling channels
When a TV channel sends its Network Name, the auto
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
installation detects the information and assigns a name
to it. However, you can change individual channel
names.
Press a/b to set “Skip” to “On”, and then press OK.
Setting the decoder
When connecting a decoder to the unit, you need to
assign the terminal input.
assign the terminal input.
NOTE
• “Off” is factory preset value.
• “INPUT1” is the recommended selection.
• “INPUT1” is the recommended selection.
Channels with “Skip” set to “On” are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
using Pr/Ps even if selected while watching the
image from the TV.
Press a/b to set “Decoder” to “INPUT1”, “INPUT2”
or “INPUT3”, and then press OK.
or “INPUT3”, and then press OK.
• Terminal inputs information displays.
(Off, INPUT1, INPUT2, INPUT3)
Skipping channels
NOTE
• See page 65 for setting PIN.
• When “Lock” is set to “On” for a channel, “Child lock has
• When “Lock” is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of
the channel are blocked.
the channel are blocked.
• When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
PIN lifts the child lock temporarily until the power is turned
off.
Setting the child lock
You can block the viewing of any channel.
Press a/b to set “Lock” to “On”, and then press OK.
Setting the booster
Picture quality may improve in regions with weak signal
strength using this function.
strength using this function.
Press a/b to set “Booster” to “On”, and then press
OK.
OK.
NOTE
• If signal strength is strong enough for the selected
channel, the effect is negligible and may produce
instability. In such case, select “Off”.
instability. In such case, select “Off”.
LC-65GD1E(E)-d
05.9.21, 7:24 AM
25
Click on the first or last page to see other LC-65GD1E (serv.man5) service manuals if exist.